05 / Industrial

Surface and water disinfection, scaled to any facility.

SPT95™ is used at 675 ppm for surface disinfection, with no corrosivity in use and no PPE required in normal use.

Request a sample Download spec sheet
675 ppm
Surface disinfection, in use
None
Corrosivity in use
No PPE
Required in normal use

Effective on surfaces. Gentle on equipment.

SPT95™ kills bacteria, viruses, fungi and spores quickly and effectively, while remaining safe to both people and sensitive environments. It is non-toxic and non-hazardous.

It has no corrosivity in use and is near-neutral to 304 and 316 steel and polymers. It contains no stabilising salts, which can corrode machinery such as fogging and dosing sprayers.

In building water systems, SPT95™ clears biofilm without turning off the supply and removes the need for pasteurisation, with energy savings of up to 20% for institutions such as hospitals, hotels and museums.

Industrial in-use concentrations

Diluted on site from the 32,000 ppm concentrate

Surface disinfection 675 ppm
Process water Around 1 ppm
Concentrate as supplied 32,000 ppm

Deployment

Where it's deployed

One concentrate for surfaces, equipment and water across your site.

Facility Surfaces
Surface disinfection at 675 ppm. SPT95™ has full EN 14476 virucidal activity.
Equipment & Machinery
No corrosivity in use. Near-neutral to 304 and 316 steel and polymers.
Dosing Equipment
Contains no stabilising salts, the cause of corrosion in fogging and dosing sprayers used with other HOCl products.
Process Water
Disinfects cooling towers, boilers and production water systems, dosed to around 1 ppm.
Building Water Systems
Removes the need for pasteurisation, with energy savings of up to 20%.
Safer Handling
Not classified under GB-CLP at supply concentration. No PPE in normal use.

Technical

Specification at a glance

Every figure below is drawn from SPT95™ published data. Test documentation is available on request.

Parameter Value Note
Concentration as supplied 32,000 ppm Customisable up to 32,000 ppm
Surface disinfection 675 ppm In-use concentration
Water treatment Around 1 ppm At the point of use
HOCl purity Greater than 95% Held above 95% across pH 2.6 to 7.6
Corrosivity in use None Near-neutral to 304 and 316 steel and polymers
PPE in normal use None required Non-hazardous for transport and storage
Classification Not classified Under GB-CLP at supply concentration. No Class 8 freight
Virucidal EN 14476 full activity Adenovirus, norovirus, poliovirus, human coronavirus 229E, influenza A H1N1 and H5N1, vaccinia
Shelf life 18 months Store in the black packaging it is supplied in

Comparison

How SPT95™ compares

SPT95™ against the chemistries it is most often measured against.

Other HOCl Products
The limitation
Often a mixture of HOCl with sodium, chloride, hypochlorite and stabiliser salts. Typically 500 ppm maximum, 30% maximum purity and a 3 to 6 month maximum shelf life. Stabilising salts can corrode machinery such as fogging and dosing sprayers.
SPT95™
HOCl and water only, customisable up to 32,000 ppm, minimum 95% purity and no corrosivity in use.
Chlorine Dioxide (ClO₂)
The limitation
Slower, with longer contact times. Produces chlorites and chlorates, which are harmful and highly regulated. Pre-mixed solutions are not suitable for long-term storage, and on-site generation relies on precursor chemicals classified as Dangerous Goods.
SPT95™
Fast acting with short contact times. Produces no harmful by-products and is non-toxic. Stable at concentrations up to 32,000 ppm and non-hazardous for transport and storage.
Chlorine & Hypochlorite
The limitation
Barely penetrate the biofilm that shields pathogens. They bring corrosivity, handling hazards, disinfection by-products and fast decay, forcing continuous over-dosing and pH balancing.
SPT95™
Neutrally charged HOCl penetrates biofilm and kills the microorganisms embedded in it. No THMs, HAAs or chlorate. Low corrosivity and pH-agnostic across a wide range, so no pH-correction chemistry is needed.

Industrial, Next step

Ready to trial SPT95™ in your facility?

Request a sample Download spec sheet